my-emacs-d/elpa/with-editor-20160408.201/with-editor.info

323 lines
13 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This is with-editor.info, produced by makeinfo version 5.2 from
with-editor.texi.
The library with-editor makes it easy to use the Emacsclient as the
$EDITOR of child processes, making sure they know how to call home.
For remote processes a substitute is provided, which communicates with
Emacs on standard output instead of using a socket as the Emacsclient
does.
This library was written because Magit has to be able to do the above
to allow the user to edit commit messages gracefully and to edit rebase
sequences, which wouldnt be possible at all otherwise.
Because other packages can benefit from such functionality, this
library is made available as a separate package. It also defines some
additional functionality which makes it useful even for end-users, who
dont use Magit or another package which uses it internally.
Copyright (C) 2015-2016 Jonas Bernoulli <jonas@bernoul.li>
You can redistribute this document and/or modify it under the terms
of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option)
any later version.
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
INFO-DIR-SECTION Emacs
START-INFO-DIR-ENTRY
* With-Editor: (with-editor). Using the Emacsclient as $EDITOR.
END-INFO-DIR-ENTRY

File: with-editor.info, Node: Top, Next: Using the With-Editor package, Up: (dir)
With-Editor User Manual
***********************
The library with-editor makes it easy to use the Emacsclient as the
$EDITOR of child processes, making sure they know how to call home.
For remote processes a substitute is provided, which communicates with
Emacs on standard output instead of using a socket as the Emacsclient
does.
This library was written because Magit has to be able to do the above
to allow the user to edit commit messages gracefully and to edit rebase
sequences, which wouldnt be possible at all otherwise.
Because other packages can benefit from such functionality, this
library is made available as a separate package. It also defines some
additional functionality which makes it useful even for end-users, who
dont use Magit or another package which uses it internally.
Copyright (C) 2015-2016 Jonas Bernoulli <jonas@bernoul.li>
You can redistribute this document and/or modify it under the terms
of the GNU General Public License as published by the Free Software
Foundation, either version 3 of the License, or (at your option)
any later version.
This document is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
* Menu:
* Using the With-Editor package::
* Using With-Editor as a library::
* Debugging::
— The Detailed Node Listing —
Using the With-Editor package
* Configuring With-Editor::
* Using With-Editor commands::

File: with-editor.info, Node: Using the With-Editor package, Next: Using With-Editor as a library, Prev: Top, Up: Top
1 Using the With-Editor package
*******************************
The With-Editor package is used internally by Magit when editing
commit messages and rebase sequences. It also provides some commands
and features which are useful by themselves, even if you dont use
Magit.
For information about using this library in you own package, see
*note Using With-Editor as a library: Using With-Editor as a library.
* Menu:
* Configuring With-Editor::
* Using With-Editor commands::

File: with-editor.info, Node: Configuring With-Editor, Next: Using With-Editor commands, Up: Using the With-Editor package
1.1 Configuring With-Editor
===========================
With-Editor tries very hard to locate a suitable emacsclient executable,
so ideally you should never have to customize the option
with-editor-emacsclient-executable. When it fails to do so, then the
most likely reason is that someone found yet another way to package
Emacs (most likely on OS X) without putting the executable on $PATH,
and we have to add another kludge to find it anyway.
-- User Option: with-editor-emacsclient-executable
The emacsclient executable used as the editor by child process of
this Emacs instance. By using this executable, child processes can
call home to their parent process.
This option is automatically set at startup by looking in
exec-path, and other places where the executable could be
installed, to find the emacsclient executable most suitable for the
current emacs instance.
You should *not* customize this option permanently. If you have to
do it, then you should consider that a temporary kludge and inform
the Magit maintainer as described in *note Debugging: Debugging.
If With-Editor fails to find a suitable emacsclient on you system,
then this should be fixed for all users at once, by teaching
with-editor-locate-emacsclient how to so on your system and
system like yours. Doing it this way has the advantage, that you
wont have do it again every time you update Emacs, and that other
users who have installed Emacs the same way as you have, wont have
to go through the same trouble.
Note that there also is a nuclear option; setting this variable to
nil causes the "sleeping editor" described below to be used even
for local child processes. Obviously we dont recommend that you
use this except in "emergencies", i.e. before we had a change to
add a kludge appropriate for you setup.
-- Function: with-editor-locate-emacsclient
The function used to set the initial value of the option
with-editor-emacsclient-executable. Theres a lot of voodoo
here.
The emacsclient cannot be used when using Tramp to run a process on a
remote machine. (Theoretically it could, but that would be hard to
setup, very fragile, and rather insecure).
With-Editor provides an alternative "editor" which can be used by
remote processes in much the same way as local processes use an
emacsclient executable. This alternative is known as the "sleeping
editor" because it is implemented as a shell script which sleeps until
it receives a signal.
-- User Option: with-editor-sleeping-editor
The sleeping editor is a shell script used as the editor of child
processes when the emacsclient executable cannot be used.
This fallback is used for asynchronous process started inside the
macro with-editor, when the process runs on a remote machine or
for local processes when with-editor-emacsclient-executable is
nil.
Where the latter uses a socket to communicate with Emacs server,
this substitute prints edit requests to its standard output on
which a process filter listens for such requests. As such it is
not a complete substitute for a proper Emacsclient, it can only be
used as $EDITOR of child process of the current Emacs instance.
It is unlikely that you should ever have to customize this option.

File: with-editor.info, Node: Using With-Editor commands, Prev: Configuring With-Editor, Up: Using the With-Editor package
1.2 Using With-Editor commands
==============================
This section describes how to use the with-editor library _outside_ of
Magit. You dont need to know any of this just to create commits using
Magit.
The commands with-editor-async-shell-command and
with-editor-shell-command are intended as drop in replacements for
async-shell-command and shell-command. They automatically export
$EDITOR making sure the executed command uses the current Emacs
instance as "the editor". With a prefix argument these commands prompt
for an alternative environment variable such as $GIT_EDITOR.
-- Command: with-editor-async-shell-command
Like async-shell-command, but the command is run with the current
Emacs instance exported as $EDITOR.
-- Command: with-editor-shell-command
Like async-shell-command, but the command is run with the current
Emacs instance exported as $EDITOR. This only has an effect if
the command is run asynchronously, i.e. when the command ends with
&.
To always use these variants add this to you init file:
(define-key (current-global-map)
[remap async-shell-command] 'with-editor-async-shell-command)
(define-key (current-global-map)
[remap shell-command] 'with-editor-shell-command)
Alternatively use the global shell-command-with-editor-mode.
-- Variable: shell-command-with-editor-mode
When this mode is active, then $EDITOR is exported whenever
ultimately shell-command is called to asynchronously run some
shell command. This affects most variants of that command, whether
they are defined in Emacs or in some third-party package.
The command with-editor-export-editor exports $EDITOR or another
such environment variable in shell-mode, term-mode and eshell-mode
buffers. Use this Emacs command before executing a shell command which
needs the editor set, or always arrange for the current Emacs instance
to be used as editor by adding it to the appropriate mode hooks:
(add-hook 'shell-mode-hook 'with-editor-export-editor)
(add-hook 'term-mode-hook 'with-editor-export-editor)
(add-hook 'eshell-mode-hook 'with-editor-export-editor)
Some variants of this function exist; these two forms are equivalent:
(add-hook 'shell-mode-hook
(apply-partially 'with-editor-export-editor "GIT_EDITOR"))
(add-hook 'shell-mode-hook 'with-editor-export-git-editor)
-- Command: with-editor-export-editor
When invoked in a shell-mode, term-mode, or eshell-mode
buffer, this command teaches shell commands to use the current
Emacs instance as the editor, by exporting $EDITOR.
-- Command: with-editor-export-git-editor
Like with-editor-export-editor but exports $GIT_EDITOR.
-- Command: with-editor-export-hg-editor
Like with-editor-export-editor but exports $HG_EDITOR.

File: with-editor.info, Node: Using With-Editor as a library, Next: Debugging, Prev: Using the With-Editor package, Up: Top
2 Using With-Editor as a library
********************************
This section describes how to use the with-editor library _outside_ of
Magit to teach another package how to have its child processes call
home, just like Magit does. You dont need to know any of this just to
create commits using Magit. You can also ignore this if you use
with-editor outside of Magit, but only as an end-user.
For information about interactive use and options which affect both
interactive and non-interactive use, see *note Using the With-Editor
package: Using the With-Editor package.
-- Macro: with-editor &rest body
This macro arranges for the emacsclient or the sleeping editor to
be used as the editor of child processes, effectively teaching them
to call home to the current emacs instance when they require that
the user edits a file.
This is essentially done by establishing a local binding for
process-environment and changing the value of the $EDITOR
environment variable. This affects all processes started by forms
inside BODY.
-- Function: with-editor-set-process-filter process filter
This function is like set-process-filter but ensures that adding
the new FILTER does not remove the with-editor-process-filter.
This is done by wrapping the two filter functions using a lambda,
which becomes the actual filter. It calls
with-editor-process-filter first, passing t as
NO-STANDARD-FILTER. Then it calls FILTER.

File: with-editor.info, Node: Debugging, Prev: Using With-Editor as a library, Up: Top
3 Debugging
***********
With-Editor tries very hard to locate a suitable emacsclient executable,
and then sets option with-editor-emacsclient-executable accordingly.
In very rare cases this fails. When it does fail, then the most likely
reason is that someone found yet another way to package Emacs (most
likely on OS X) without putting the executable on $PATH, and we have
to add another kludge to find it anyway.
If you are having problems using with-editor, e.g. you cannot
commit in Magit, then please open a new issue at
<https://github.com/magit/magit/issues> and provide information about
your Emacs installation. Most importantly how did you install Emacs and
what is the output of M-x with-editor-debug?

Tag Table:
Node: Top1545
Node: Using the With-Editor package3236
Node: Configuring With-Editor3852
Node: Using With-Editor commands7459
Node: Using With-Editor as a library10622
Node: Debugging12294

End Tag Table

Local Variables:
coding: utf-8
End: